Varenr: X82.19R

Sherco Enduro Sykkel 2T 300 SE Racing 2019

Velg type
Velg komponenter
u/mva: kr. 64.800,-
kr. 81.000,-
Legg i handlekurv
Ikke på lager - bestillingsdager 0

Power To Spare

The 300 2-stroke is the perfect crossover tool. New valve timing provides even more smoothness as the horsepower builds. This big power is delivered with perfect progression, guaranteeing maximum adhesion, synonymous with efficiency at the foot of the steepest slopes. The weight of the bike is very light considering the fact that it is equipped with a modern electric starting system; it is no heavier than a kick start system.

Deemed excellent by the franchise users, Sherco has further improved the bike this year so that it is even more suited to performing well in the extreme enduro events. The new clutch is even more durable and the gearbox has been strengthened. In the “soft” position, the new ignition settings and valve functions make extreme maneuvers manageable for every rider, no matter what their skill level is.

 

Highlights for 2019

  • Bold new graphics
  • WP Xplor fork and WP shock
  • Increased chassis flex for less impact transfer to hands
  • Improved handlebar position and 400 gram weight savings
  • 90 gram lighter Neken triple clamps
  • Stronger rear hub on Excel rims
  • Stronger rear fender and increased fastener size
  • More powerful regulator with increases cooling efficiency
  • 10mm larger radiators with new water lines
  • Wiring harness re-routed for improved flexibility and protection
  • New FMF expansion chamber with upgraded routing for less exposure+
 
Engine 2 Stroke “Single cylinder with electronically controlled exhaust valve and booster”
Displacement 293.14 cc (17.89 cu in)
Bore and stroke 72 x 72 mm (2.83 x 2.83 in)
Carburetor Keihin PWK 36
Cooling Liquid with forced circulation
Starting Electric Starter
Battery 12 V / 4Ah Yuasa
Exhaust FMF Aluminum silencer
Transmission 6 speed sequential gearbox, primary gear drive chain secondary drive
Clutch Hydraulic, multidisc in oil bath
Ignition DC – CDI ignition with digital advance – 220 W Alternator
Chassis High strength Chrome-Molybdenum steel semi-perimeter
Fuel tank 10.4 L capacity
Brakes Brembo Hydraulic Ø 260 mm (10.24 in) (front) Ø 220 mm (8.66 in) (rear)
Front suspension WP hydraulic telescopic adjustable compression and rebound 48 mm diameter with 300 mm of stroke
Rear suspension WP Monoshock progressive rear suspension with aluminum control rods, adjustable for high and low speed compression and spring pre-load. 330 mm (13 in) Racing shock.
Front wheel 1.60 x 21″ aluminum rim with Michelin Enduro Competition tube-type tire
Rear wheel 2.15 x 18″ aluminum rim with Michelin Enduro Competition tube-type tire
Weight 105 kg (231.49 lb)
Wheelbase 1480 mm (58.27 in)
Ground clearance 355 mm (13.78 in)
Seat height 950 mm (37.4 in)